LGRP® LIZARD PRO ESC FOR TRAXXAS® TRX4M™ WITH BLUETOOTH BY FURITEK
Introducing the Lizard Pro ESC Bundle, designed for the TRX4M™. This bundle includes the necessary adapter for seamless compatibility with the TRX4M.
Features:
- Supports sensorless brushless DC and brushed DC motors (configurable via app, default is brushless)
- FOC (Field-oriented control) technology for smooth performance
- Plug & Play designed for AXIAL SCX24™ and TRX4M™ crawlers
- 5V/6.5V 2.5A Built-in BEC (configurable via app)
- Supports 2S-3S LiPo battery – mini size and lightweight for easy installation
- Super easy programming via app on both Android and iOS devices
- Firmware updates available (Bluetooth module required)
- Real-time telemetry up to 10Hz – Compatible with stock TX/RX or any other TX/RX system
Please note:
If you are running the Lizard Pro ESC with our Creeper brushless motor, we recommend using the app to calibrate the throttle, brake, and reverse functionality during initial setup. Ensure the ESC is programmed for brushless motors and utilizes the "Micro Komodo tune."
For those using a brushed motor with this ESC, you will need an additional adapter cable since brushed motors use a 2-pin connector, while brushless motors use a 3-pin connector.
Link to Adapter Cable
WARNING:
3S only works best with 2204 1400KV motors and 050 Brushed Motors.
Specifications:
- Supports 2S-3S LiPo battery
- BIG BEC: 5V or 6.5V 2.5A (no external BEC needed if using a large servo)
- Constant current: 30A
- Burst current: 50A
- Built-in power switch
- Dimensions: 28(L) x 15.5(W) mm
- Weight: 3.7g
Note:
The Furitek ESC is compatible with: Komodo 2204 1400KV, Micro Komodo 3450KV, and Mini Komodo 2000KV motors. Please do not run motors with higher KV (e.g., 4100KV) on 3S batteries.
Warning:
This product may contain chemicals known to the State of California to cause cancer. For more information, visit www.P65Warnings.ca.gov.
