3MM LED LIGHT HARNESS PAIR

Little Guy Racing Parts® has your light wiring solutions. Bust your stock lights up or just want to add some extra lights to your scale micro crawler build.

LGRP® has a stock replacement 3mm LED harnesses, Featuring a JR plug, and 2 cool white 3mm LEDs per harness. LGRP's® small amount of added wire length on our 80mm model gives you the extra wiggle room you've needed if you've had to reposition your receiver slightly. LGRP® also has an option for a 150mm harness if you still want headlights but have moved the receiver to the back of the car.

What's included:

- (2) Cool white LED light harnesses (pick your length)

 - Voltage rating: 5-12 volt battery

NOTE: If you must fasten the LEDs into place do not use hot glue it is too hot and could damage the lights, we recommend super glue, goop, white glue, and tape are all suitable for fastening our LEDs.

Never pull on any part of the wires or connectors, always carefully use small needle nose pliers to plug into or unplug from the receiver as well as the individual lights themselves, always handle them with care and grab them on the flange of the bulb

“WARNING: This product may contain chemicals known to the State of California to cause cancer.” WARNING: This product can expose you to chemicals including arsenic, which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov.”